The machine is suitable to string one or two ropes or bundled conductors.
The bull-wheel grooves are made up of high resistance interchangeable nylon sectors.
The machine is completely electronically controlled.
Note: The machine is also available with bull-wheel grooves made of wearproof heat and chemically treated steel (AFS517).
SPEED AT MAX PULL
PULL AT MAX SPEED
Note: the basic machine performance is calculated at 20°C and at sea level
MAX CONDUCTOR DIAMETER
MAX ROPE DIAMETER
104 kW (140 hp)
Closed hydraulic circuit that allows stepless speed variation in both rotating directions.
This machine is provided with a pull presetting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
Negative self-acting hydraulic brake
Hydraulic dynamometer with set-point and automatic control of maximum pull
Hydraulic oil cooling system
Digital meter counter
Control instruments for hydraulics system and Diesel engine
Rigid axle for towing at max speed of 30 km/h with mechanical parking brake
Hydraulic power pack to control up to 2 reel stands with hydraulic head or 2 reel winders
Electronic pull and speed recorder kit (instrument not included)
Hydraulic front stabiliser
Grounding connection point
Hydraulic power for an external compressor
Preheating device for use up to -30°C
Cable remote control kit (instrument not included)
Radio remote control kit (instrument not included)
1 or 2 hydraulic rope/conductor clamps for reel/drum change operations
Gearbox with 3 operating positions:
- neutral position (with free bull-wheels for conductor loading and unloading)
- low tension position (6 ÷ 22 kN)
- nominal tension position
Electronic arrangement for connection of multiple machines and for stringing synchronization
Electronic pull and speed recorder