Pullers

Hydraulic Puller ARS200
  • The machine is suitable to string one rope.
    The bull-wheel grooves are made of heat treated steel.

    PERFORMANCE

    MAX PULL

    15 kN

    SPEED AT MAX PULL

    0.7 km/h

    MAX SPEED

    3.6 km/h

    PULL AT MAX SPEED

    4 kN

    Note: the basic machine performance is calculated at 20°C and at sea level

     CHARACTERISTICS

    BULL-WHEEL DIAMETER

    200 mm

    MAX ROPE DIAMETER

    8 mm

    MASS (WITHOUT ROPE)

    500 kg

    ENGINE

    GASOLINE

    13 kW (18 hp)

    COOLING SYSTEM

    air

    ELECTRICAL SYSTEM

    12 V

  • HYDRAULIC TRANSMISSION

    Closed hydraulic circuit for stepless speed variation in both rotating directions.

    CONFIGURATION

    Negative self-acting hydraulic brake
    Hydraulic dynamometer with set-point and automatic control of maximum pull
    On board reel winder with automatic level wind and special reel BOF370 for 500 m of Ø 8 mm rope

  • AVAILABLE DEVICES

    ALL102

    Pulling rope locking device when capstan is used (compulsory for EC market)

    ALL105

    Rigid axle and towing bar detachable, for manual towing

    ALL107

    Capstan (diameter=220 mm equipped with guide rope rollers)

    ALL111

    Swivel guide rope roller

    ALL112

    Trailer for towing at max speed of 80 km/h with mechanical parking brake.
    Towing shaft with inertial braking system. Hook with Ø 40 mm eye.
    Lighting system included
    EC type-approved for road circulation on demand