Pullers

Hydraulic Pullers ARS700 - ARS701
  • The machine is suitable to string one rope.
    The bull-wheel grooves are made of heat treated steel.
    The machine is completely electronically controlled.

    PERFORMANCE MOD. ARS700

    MAX PULL

    160 kN

    SPEED AT MAX PULL

    2.5 km/h

    MAX SPEED

    5 km/h

    PULL AT MAX SPEED

    80 kN

    PERFORMANCE MOD. ARS701

    MAX PULL

    180 kN

    SPEED AT MAX PULL

    2.2 km/h

    MAX SPEED

    5 km/h

    PULL AT MAX SPEED

    80 kN

    Note: the basic machine performance is calculated at 20°C and at sea level

     CHARACTERISTICS

    BULL-WHEEL DIAMETER

    600 mm

    MAX ROPE DIAMETER

    24 mm

    MASS

    6000 kg

  • ENGINE

    DIESEL

    209 kW (280 hp)

    COOLING SYSTEM

    water

    ELECTRICAL SYSTEM

    24 V

    HYDRAULIC TRANSMISSION

    Closed hydraulic circuit for stepless speed variation in both rotating directions.
    This machine is provided with a pull presetting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.

    CONFIGURATION

    Negative self-acting hydraulic brake
    Hydraulic dynamometer with set-point and automatic control of maximum pull
    Hydraulic oil cooling system
    Control instruments for hydraulic system and Diesel engine
    Rigid axle for towing at max speed of 30 km/h with mechanical parking brake
    On board reel winder with automatic level wind, suitable for standard reel mod. BOF010 and BOF020 (AXR001 included)
    Hydraulic front stabiliser
    Grounding connection point

  • AVAILABLE DEVICES

    ALL001

    Lighting system for the trailer

    ALL002

    Air brake system for the trailer

    ALL010

    Hydraulic power pack to control a separate reel winder

    ALL022

    Hydraulic quick connectors to control a separate reel winder instead of the built-in one

    ALL037

    Preheating device for use up to -30°C

    ALL051

    Cable remote control kit (instrument not included)

    ALL053

    Electronic pull and speed recorder kit (instrument not included)

    ALL059

    Radio remote control kit (instrument not included)

    ALL070

    Extra rollers for an additional pilot rope

    ALL071

    Hydraulic rope clamp for reel change operations

    ALL089

    Electronic arrangement for connection of multiple machines and for stringing synchronization

    ALL111

    Swivel guide rope roller

    AXR001

    Extra shaft

    DLR300

    Electronic pull and speed recorder