The machine is suitable to string one rope.
The bull-wheel grooves are made of heat treated steel.
The machine is completely electronically controlled.
Note: detachable in 5 modular units (<1200 kg) for helicopter transportation.
The trailer is not included (optional).
SPEED AT MAX PULL
PULL AT MAX SPEED
Note: the basic machine performance is calculated at 20°C and at sea level
MAX ROPE DIAMETER
1- FRONT CAPSTAN UNIT
2- REAR CAPSTAN UNIT
3- GEAR FRAME UNIT
WORK UNIT TOTAL WEIGHT
4- TANK UNIT (WITH FLUID)
5- ENGINE UNIT (WITH FLUID)
KIT LIFTING BEAM AND ANCHORS
129 kW (174 hp)
1 closed hydraulic circuit for stepless speed variation in both rotating directions.
This machine is provided with a pull presetting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
A set of hoses connect power unit with the operating machine.
2 negative self-acting hydraulic brakes
Hydraulic dynamometer with set-point and automatic control of maximum pull
Cable remote control instrument for hydraulic system and diesel engine
Hydraulic oil cooling system
Max fixed joint suitable to pass on bull-wheel grooves is GFT050
Grounding connection point
Electronic pull and speed recorder kit (instrument not included)
Hydraulic rope clamp for reel change operations
Trailer equipped with:
- Hydraulic front plough and hydraulic rear stabilizer
- Incorporated reel winder for BOF020
- Double axle boogie suspension for towing at max speed of 30 km/h with mechanical parking brake
- Tow hook
Electronic pull and speed recorder device