The machine is suitable to string one rope.
The bull-wheel grooves are made of heat treated steel.
The machine is completely electronically controlled.
Note: detachable in modular units (<3200 kg) for helicopter transportation.
The trailer is not included (optional).
SPEED AT MAX PULL
PULL AT MAX SPEED
Note: the basic machine performance is calculated at 20°C and at sea level
MAX ROPE DIAMETER
FRONT CAPSTAN UNIT
REAR CAPSTAN UNIT
GEAR FRAME UNIT
WORK UNIT TOTAL WEIGHT
POWER UNIT WEIGHT (DRY)
POWER UNIT WEIGHT (WITH FLUID)
KIT LIFTING BEAM AND ANCHORS
209 kW (280 hp)
1 closed hydraulic circuit for stepless speed variation in both rotating directions.
This machine is provided with a pull presetting system that maintains the pre-set pulling value (also when the speed is reduced to “0”) by automatically adjusting the operation speed according to the friction and unexpected loads which may occur.
A set of hoses connect power unit with the operating machine.
2 negative self-acting hydraulic brakes
Hydraulic dynamometer with set-point and automatic control of maximum pull
Cable remote control instrument for hydraulic system and Diesel engine
Hydraulic oil cooling system
Safety anchoring point on the side of the machine
Max fixed joint suitable to pass on bull-wheel grooves is GFT050
Grounding connection point
Electronic pull and speed recorder kit (instrument not included)
Hydraulic rope clamp for reel change operations
Trailer equipped with:
- Hydraulic front plough and hydraulic rear stabilizer
- Incorporated reel winder for BOF020
- Double axle boogie suspension for towing and max speed of 30 km/h with mechanical parking brake
- Tow hook
Electronic pull and speed recorder device