Winches

Hydraulic Mini Winch
  • The machine is designed for tower erection operation and it is suitable to pull one rope. The mini winch is an equipment composed by:
    - n°1 mini winch (ARS515)
    - n°1 power unit (CPA204)
    - and/or n°1 power unit (CPA205)
    - n°1 power unit connection kit (CPK206)

    The bull-wheel grooves are made of thermally treated steel.

    The machine is completely hydraulic controlled.

    Note: detachable in modular units for easy transportation.

    SINGLE POWER UNIT PERFORMANCE

    MAX PULL

    50 kN

    SPEED AT MAX PULL

    0.5 km/h

    MAX SPEED

    1.0 km/h

    PULL AT MAX SPEED

    25 kN

    DOUBLE POWER UNIT PERFORMANCE

    MAX PULL

    50 kN

    SPEED AT MAX PULL

    1.0 km/h

    MAX SPEED

    2.0 km/h

    PULL AT MAX SPEED

    25 kN

    Note: the basic machine performance is calculated at 20°C and at sea level

  •  CHARACTERISTICS
    BULL-WHEEL DIAMETER 256 mm

    MAX ROPE DIAMETER

    16 mm

    WORKING UNIT MASS 340 kg
    POWER UNIT MASS (DRY) 290 kg
    POWER UNIT MASS (WITH FLUID) 380 kg
    ENGINE

    GASOLINE

    16.5 kW (22.1 hp)

    COOLING SYSTEM

    air

    ELECTRICAL SYSTEM

    12 V

    HYDRAULIC TRANSMISSION

    Closed hydraulic circuit for stepless speed variation in both rotating directions.
    A set of hoses connect the power unit with the operating machine.

  • CONFIGURATION

    Negative self-acting hydraulic brake integrated into the gear reductor
    Overcenter valve for control the movement of suspended load
    Qiuck connectors on the working unit to connect fast to the power unit
    Mechanical lever to operate on the capstan speed
    Emergency stop
    Open side capstan design
    2 anchoring points on the side of the working unit

    AVAILABLE DEVICES

    ALL102

    Pulling rope locking device when capstan is used (compulsory for EC market)

    ALL105

    3 detachable trailers with manual towing bar for ARS515, CPA204 and CPA205

    CPK206

    Power unit connection kit