跳转到主要内容

TP-PMRG

Protection and measurement relay
ASK A QUOTE

The TP-PMRG is a directional fault detector with advanced measuring functionalities, network automation, analysis and monitoring of the electrical service quality, recording of fault transients and remote control. TP-PMRG complies with the latest E-distribuzione global standards and it is intended to be installed in secondary MV substations in order to protect and manage all the assets in a more efficient way.

Benefits

Thanks to its features TP-PMRG contributes to drastically reduce the outage time of the MV distribution network.

Compliant with IEC61850 Ed.2 standard.

Features

Tesmec T-PMR Protection and Measurement Relay
  • 12 integrated protection functions, additional “built-in control” functions and graphical programming (IEC61131-3)
  • Detection of phase-phase and phase-ground phase failures and no voltage on the line
  • Advanced measurement, monitoring and control capabilities

Technical Specifications

GENERAL RATINGS

Capacitive sensor operating voltage MV 0,4 or 6÷24 kV± 50%
Operating frequency 50 - 60 Hz ± 5%

PROTECTION FUNCTIONS (ANSI/IEEE)

67/51 (Overcurrent) Independent time or inverse time (NIT/VIT/EIT/LIT) and 2ndH REST
51N (earth overcurrent) Independent time or inverse time (NIT/VIT/EIT/LIT) and 2ndH REST
67N (phase/earth directional overcurrent) Independent time or inverse time (NIT/VIT/EIT/LIT) and 2ndH REST
32P (directional/reverese power) Independent time 
27/27DC (undervoltage) Independent time or inverse time 
50BF (breaker failure) Independent time 
59/59N (maximum voltage) Independent time or inverse time 
EAC 81 (frequency) Independent time (max, min, derived and block functions)
79 (auto reclosing CA) Independent time 
25 (synchro-check device) Synchronus parallel, asynchronus, synchronus + asynchronus

VOLTAGE ANALOG INPUT (50Hz / 60Hz)

Transformation Ratio (linear sensor) 10 kV : 1 V [RMS] (primary 230V:1V [RMS])
Transformation Ratio (capacitive sensor) Calibrated via SW for 0,4 o 6÷24 kV ± 50%

CURRENT ANALOG INPUT (50Hz / 60Hz)

Transformation ratio (linear sensor) 1.0 kA : 300 mV / 1 V kA: 100mV / 1.0 kA: 31 mV [RMS]
Transformation ratio (Rogowski sensor) mV [RMS] 1.0 kA : 300 mV / 1 V kA: 100mV / 1.0 kA: 31 mV [RMS]
Primary full-scale 9 kA [RMS]